Bon Accord, AB

Quick Summary

Replacement windows and doors in Bon Accord, AB are more than a simple swap. Drafty frames, fogged glass, and stiff-swinging entry doors all point to gaps that cost you on your heating bills each winter. GreenFox Windows & Doors supplies and installs every product we bring to your home, from replacement windows to custom doors. We also offer free in-home consultations to get you started.

Windows And Doors In Bon Accord, AB — Replacement And New Construction

Windows And Doors Fitted To Alberta’s Climate

Windows and doors in Bon Accord, AB stop feeling like a background issue once the cold starts pushing through the frame.

A gap you can feel with your hand in January. A door that drags the threshold every time it swings shut. Small problems that drive up your heating bill faster than most people expect.

That’s when it becomes worth fixing the problem properly, with products built to handle Alberta winters.

A gap in a window frame you can feel with your hand in January. A door that drags the threshold every time it swings shut. Small problems that drive up your heating bill faster than most people expect.

That’s when windows and doors in Sturgeon County, AB stop being a background nuisance. They become something worth fixing properly, with products built to handle Alberta winters.

We’re GreenFox Windows & Doors, and our installation team handles everything from replacement windows to custom entry and patio doors, as well as new construction projects. It’s one call, one crew, and one project handled from start to finish.

Most homeowners don’t realize how much the measurement stage matters.

A window unit that’s off by even a fraction leaves gaps — gaps that seal poorly and perform worse every season. We don’t hand that part off. We measure it ourselves.

Beyond the install, you’ll know what’s happening at your home. Delivery timing, crew arrival, and what comes next — all of that gets communicated before each step, not after the trucks pull in.

Request Your Free Consultation.

"*" indicates required fields

Products of Interest. Choose all that apply*
Consent

Expert Windows And Doors Coverage For Bon Accord, AB Homes

Measured Installation, Products We Stand Behind

Every window and door we install comes directly from us — no third-party products, no guesswork about fit, finish, or accountability.

Each project starts with precise opening measurements.

Our installation team matches unit dimensions to your existing rough opening before anything is ordered. Alberta winters put real stress on frames, seals, and hardware. The products we install are selected to handle those conditions through many seasons of daily use.

Windows

Our installation team handles window work by treating every window opening as a system. That means checking the rough opening for square, verifying the sill slope for drainage, and selecting a unit sized to match.

We only install products we supply directly. That gives us full knowledge of the unit’s specifications — frame depth, glazing package, and weatherstrip profile — before the job starts.

Every window we install is seated and sealed to the manufacturer’s specifications. You won’t be left with a unit that performs differently from what was quoted.

See Our Window Gallery

More Windows Services

Replacement Windows

For replacement windows, our team measures each opening in at least two directions to catch any out-of-square conditions before the new unit ships.

What the install actually delivers:

  • Weatherstrip profiling matched to the replacement unit’s frame depth for a consistent contact fit
  • Sill-slope verification so water drains away from the frame rather than pooling at the seal
  • Interior and exterior sealing completed in sequence, not skipped to save time

A properly measured and properly seated replacement window maintains its thermal performance across Alberta’s full temperature range, not just at installation.

Explore Our Replacement Windows

New Construction Windows

For new construction projects in Alberta, we coordinate with the rough-framing schedule to ensure window openings are confirmed for size and plumb before units are ordered.

On the job, this looks like:

  • Flashing tape is applied at the sill before the unit sets, directing any incidental moisture outward
  • Rough-opening dimensions verified against the unit spec sheet before the frame is sheathed
  • Nailing-fin attachment confirmed at specified intervals to prevent racking under wind load

Getting windows into a new build at the right stage keeps the exterior envelope tight from day one.

Learn More About New Construction Windows

Entry Doors

Custom doors are fitted to the opening — not forced into it.

Our team checks the door jamb for plumb and the threshold for level before any hardware is set.

Hinge placement, strike-plate alignment, and threshold sealing are all confirmed against the unit’s specifications. Each of those details affects how the door operates and seals through a cold Alberta winter.

We supply every door we install, so we know the product’s tolerances and can stand behind both the unit and the workmanship.

See Our Entry Door Gallery

More Entry Doors Services

Front Entry Doors

Front entry door installations in Alberta begin with a jamb plumb check and a threshold level reading. An out-of-level sill causes a door to drift open or swing shut on its own.

The details that matter most:

  • Strike-plate position set so the latch engages fully without forcing the handle
  • Hinge mortise depth matched to the door’s leaf thickness for flush, gap-free seating
  • Threshold seal compressed to the manufacturer’s specified contact depth along the full door width

A front door that operates cleanly and seals tightly is one you stop thinking about after the first winter.

More About Front Entry Doors

Storm Doors

Storm doors in Alberta are fitted to the primary door’s finished frame — our installation team takes frame-reveal measurements after the entry door is fully set, not before.

What sets our work apart:

  • Frame-reveal measurement taken after the entry door is set, so the storm door closes squarely against the stop
  • Closer hardware adjusted for Alberta’s seasonal temperature range, which affects hydraulic resistance
  • Corner reinforcement is confirmed at all four frame joints before the unit is fastened to the casing

A properly fitted storm door adds a meaningful buffer against cold infiltration at one of the home’s highest-traffic openings.

Storm Door Options

Patio Doors

Patio door installations involve a wider rough opening and a heavier unit, so our team confirms both the header load path and the sill levelness before the door is set.

What you can expect from the crew:

  • Sill levelness checked across the full span — even a small pitch causes a sliding panel to drift or bind
  • Interlock bar and latch alignment set so the panel seats against the fixed frame without forcing
  • Exterior perimeter sealed in sequence: sill pan first, then jambs, then head — not all at once

A patio door that tracks and latches smoothly on day one will stay that way through years of Alberta seasonal movement.

Our Patio Doors

French Doors

French door installations in Alberta require that both panels be hung plumb and at the same height, so the gap between them remains consistent from top to bottom.

What our installation actually delivers:

  • Astragal seal — the vertical weather seal between both panels — fitted to contact the full height of the opposing door edge
  • Individual panel plumb is checked independently, then verified as a matched pair before the hardware is set
  • Hinge count and placement confirmed against the door weight to prevent sag over time

When both panels operate and seal as designed, the whole opening performs as a single unit rather than two separate doors.

Explore French Doors

New Construction Doors

For new construction in Alberta, we coordinate door installation to follow a confirmed framing inspection. That means the rough opening dimensions are already verified before the unit ships.

On the job, this looks like:

  • Rough-opening width and height measured against the door unit’s specified clear-opening requirements
  • Jamb shimmed plumb and square before any fasteners are set, preventing future binding as the frame settles
  • Exterior door casing and flashing are installed in the correct sequence to keep the envelope continuous

Getting doors set correctly during the build saves adjustment work once the home is occupied.

New Construction Doors

Large gray two-story home surrounded by snow-covered trees with white trim, stone accents, and a snow-covered roof during winter snowfall

Why GreenFox Windows & Doors Is The Right Fit For Windows And Doors In Bon Accord, AB

An Installation Team That Treats Your Home With Care Every Step Of The Way

Picking the right team for windows and doors makes a real difference. It affects not just how the finished product looks, but how the whole experience feels from start to finish.

We supply every product we install, so there are no surprises around sourcing, fit, or follow-up. Everything is handled under one roof. Our team walks through the details with you upfront, so you know exactly what to expect before any work begins.

  • A Team Worth Knowing — From scheduling to the final walkthrough, the way we work reflects the values we hold ourselves to. We believe in providing everyone with exceptional service.
  • A Clear Process From Start To Finish — Every window and door project follows a careful, documented sequence. Each unit is measured, fitted, sealed, and reviewed with you before our installation team wraps up in Alberta.
  • Rooted In Integrity — The way we handle scheduling, communication, and cleanup reflects a deeper commitment. Our core values as an Alberta team shape how we show up on every single job.
  • Products Built For Alberta Winters — The windows and doors we supply are chosen specifically for Alberta’s climate. We only use premium-grade products because we believe in long-term performance.
  • Respect At Every Step — From your first inquiry to the final inspection, we keep communication clear and timelines honest. That is what our commitment to total customer respect in Alberta looks like in practice.

Free in-home consultations mean you get real answers about your windows and doors before committing to anything. Scheduling one is straightforward — we come to you, walk through your options together, and answer every question on the spot.

GreenFox Windows & Doors Reviews: Windows And Doors In Bon Accord, AB

What Local Homeowners Are Saying About Our Work

Homeowners who’ve had us handle their window and door projects have shared their experiences, and we think you’ll find their feedback helpful as you plan your own. Take a look at what your neighbours across Alberta are saying.

4.7 / 5 Based on 807 reviews
Posted on Google

Frequently Asked Questions About Windows And Doors In Bon Accord, AB

These questions come up regularly when homeowners start thinking through their options for windows and doors. We’ve put together clear, straightforward answers to help you feel confident before your free in-home consultation.

Best Contractors for Windows and Doors Edmonton, Alberta | GreenFox Windows & Doors

How do I know if my windows need to be replaced or just repaired?

Minor issues like hardware that sticks or a single broken seal can sometimes be addressed through window repair. If multiple panes show fogging, frames have warped, or drafts persist after resealing, replacement windows usually make more sense in the long term.

What kinds of entry doors does your installation team install?

We supply and install a full range of custom doors built for homes — front entry doors, patio doors, French doors, and storm doors included alongside a complete door installation. Every product comes through us before our installation team touches your home.

Do you only install products that you supply?

Yes — we only install windows and doors that come through us directly. This keeps quality consistent from product selection all the way through installation, so nothing falls through the gap between supplier and installer.

What happens during a free in-home consultation?

One of our team members visits your home, takes measurements, walks through your options, and answers your questions on the spot. You leave with a clear picture of scope, product choices, and next steps — no pressure, no obligation.